Receivers
| NAD T 747 AV Surround Sound Receiver |
| Wednesday, 02 September 2009 00:00 |
|
Introduction  The NAD T747 AV Surround Sound Receiver is a 7-channel two zone receiver that is capable of decoding bitstream inputs of all the latest high-resolution audio formats. I like its understated styling a la NAD. The minimalist front panel has a simple two-line VFD display in the center of the panel. The characters on this display are about 3/8” high. This is a major improvement over the super small logos that are commonly found in so many of today’s receivers and processors. Moving from left to right across the front, there is a power switch, a headphone jack, a cursor control, menu button, listening mode button, source selection switches, a volume knob, and a set of front A/V inputs. Besides the manufacturer’s trademark and the unit’s model number, the front panel sports only 3 other logos: Dolby TrueHD, DTS HD Master Audio and HDMI. That’s it. No cluttered alphabet soup for NAD!  Specifications : NAD T 747 Surround Sound Receiver
Comments (5)
...
written by Gerald greene , September 06, 2009 hi,I am looking at a receiver upgrade,one that has the new hd audio decoders my system consists of axiom m80 ,vp150 centre,and q8 surounds, receiver yamaha 659 with nad c272 driving the fronts.I'm looking at new nad t747 at 1499 cad.do you think that there well be a big difference in audio performance, or maybe just upgrade to maybe a yamaha or denon in maybe 600 to 700 price range with the hd decoders,I listen to a lot of music in 2 channel and am wondering if the pre-amp section of a nad reciver be better than my yamaha 659.I paid 700cad about 2 years ago. regards,
...
written by Jim Clements , September 08, 2009 Gerald, I did compare the NAD T747 receiver to my reference Onkyo receiver, the TX-SR805. The Onkyo can, like the NAD T747, decode all the latest audio codecs. I plan to post a thorough comparison of these two receivers on the CAVE next week. In short, I will be recommending the NAD receiver over the Onkyo due to its more refined audio performance. (The Onkyo can sound a little harsh in the upper registers and a little plump in the bass when compared to the NAD T747.) I do want to ask what Blu-Ray player you have? If you have one with multi-channel analog outputs, then you could have the player decode the newer formats and feed your receiver an analog signal through the Yamaha's 7.1-channel analog inputs.
NAD T 747 Vs. STRDA5400ES
written by Dave L , September 21, 2009 Please help?! I'm trying to choose between the NAD T 474 and the Sony STRDA54000ES. All the reviews for both are great!
Can it drive a 6 Ohm Wharfedale?
written by Novice , November 11, 2009 I'm using a set of Wharfedale diamond that come with 6 Ohms impedance. Could anyone please suggest if it can connect to this NAD T 747?
Wharfdale Speakers
written by Jim Clements , November 12, 2009 The NAD T747 manual recommends speakers that are 8 ohm minimum, despite the fact that it provides a dynamic power output rating for both 8 ohms and 4 ohms. Low-impedance speakers may demand more current from the receiver than it is designed to produce. That being said, the PSB speakers I auditioned with this receiver are rated at 4 ohms nominal. I didn't notice any issues driving those speakers that could be attributed to their impedance rating. So I suggest that you contact NAD's customer support and pose your question to them. They would be able to certify if the Wharfdale speakers would be a suitable match for the T747 reciver. Write comment
|
Subscribe to this comment's feed
