Home Receivers Denon AVR-2309CI 7.1 A/V Receiver
Receivers
Denon AVR-2309CI 7.1 A/V Receiver
Written by Gabriel Lowe   
Wednesday, 03 December 2008 17:00
Article Index
Denon AVR-2309CI 7.1 A/V Receiver
Page 2: Design, Setup, and Calibration of the Denon AVR-2309CI Receiver&heading=Page 1: Introduction to the Denon AVR-2309CI Receiver
Page 3: Denon AVR-2309CI Receiver Surround Sound Options
Page 4: AVR-2309CI Remote Controls
Page 5: Audio Performance of the Denon AVR-2309CI Receiver
Page 6: Video Capabilities and Performance of the Denon AVR-2309CI Receiver
Page 7: Other Features
Page 8: The AVR-2309CI Receiver On the Bench
Page 9: Conclusions about the Denon AVR-2309CI Receiver
All Pages

 

On the Bench

All distortion measurements were made within an 80 kHz bandwidth. Two channels were driven for all tests.

At 20 volts into 8 ohms (50 watts), IMD was 0.008%

Measured frequency response was 10 Hz - 50 kHz, - 1 dB at 5 volts and 20 volts into either 8 ohms or 4 ohms.

THD+N vs. Frequency was about the same at 5 volts and 20 volts into 8 ohms or 4 ohms, except for slightly higher distortion above 1 kHz for the 20 volts into 4 ohm measurement.

At 8 ohms, distortion decreased with power output until 130 watts, then rapidly rose to clipping (1% THD+N) at 150 watts. At 4 ohms, power output was 170 watts before the rapid rise to clipping at 200 watts (these tests were with two channels being driven).

 



 
Magazine Web Design, Web Services, and Digital Media Solutions - By: Infoswell Media, Inc.