Home
Secrets of Home Theater and High Fidelity
Emotiva ERC-1 CD player
Written by Rich Schmidt   
Thursday, 15 October 2009 00:00
Article Index
Emotiva ERC-1 CD player
Page 2: Design and Setup of the Emotiva ERC-1 CD Player
Page 3: The Emotiva ERC-1 CD Player In Use
Page 4: Technical Observations on the Emotiva ERC-1 CD Player
Page 5: Conclusions About the Emotiva ERC-1 CD Player
All Pages

Emotiva ERC-1 CD player

Introduction

The first thing you’ll notice about the Emotiva ERC-1 CD player is that it looks great. The faceplate of the player and the remote are brushed aluminum painted black accented with unfinished brushed aluminum at the edges. Nice. When it’s turned on the buttons on the face of the player light up with blue halos. This player would look right at home next to Macintosh gear.

Stare at it a while longer and you’ll notice something distinctly different – the ERC-1 is a slot loader. No drawer, no lid. Slide your disc half way in and internal goblins, mechanisms, something, will do the rest. The loading mechanism does make a little noise as its working, sounds somewhat like the drawer on a CD player (not surprising I guess) but a bit more substantial.

Specifications

  • Design: 2 Channel Slot Loading CD Player
  • Codecs: Redbook CD, HDCD, MP3
  • Analog Outputs: 1 Set XLR Balanced, 2 Sets RCA Unbalanced
  • Digital Outputs: 1 RCA S/PDIF, 1 Optical (TosLink)
  • Output Voltage: 1V rms (7V peak)
  • MFR: 20 Hz - 20 kHz ± 0.1 dB
  • THD+N: ≤0.01% 0dB 1kHz
  • Digital Output Filter: 24-Bit, 384 kHz (Analog Devices 1955)
  • Analog Output Filter Frequency: 80 kHz (-3dB)
  • Dimensions: 4.25" H x 17” W x 14” D
  • Weight: 17.5 Pounds
  • MSRP: $399 USA
  • Emotiva


 
Magazine Web Design, Web Services, and Digital Media Solutions