Home
Howard Leight Noise-Blocking Stereo Earmuffs
Written by John E. Johnson, Jr.   
Tuesday, 16 August 2011 00:00

Most of us use portable players at least now and then to listen to our music, using earbuds. But what if there is a lot of ambient noise, such as on an airplane, or if you are in a Starbucks enjoying a refreshment while you are using your laptop, or if you are playing in a band and want to hear not only your own instrument (in my case, it is the drums), but the other musicians and a click track, while the audience is nearly as loud as you are? Noise-reducing over-the-ear headphones are the answer, and the unit reviewed here, the Howard Leight Sync Noise-Blocking Stereo Earmuffs are an inexpensive and very effective solution.

sync-earmuffs-main

They are adjustable by sliding the muffs up or down, and if they fit a little too tightly (as they did with me), you simply bend the headband outward so that it loosens the tension of the spring.

The Sync Earmuffs come with a 1/8" stereo cable which will fit directly into your iPod. If using these on stage in a band, you will need a 1/8" - 1/4" stereo phone plug adapter.

In use, I found them to greatly reduce ambient noise when I was playing my drums along with jazz recordings, and because it reduced the ambient noise (crashing my cymbals) so much, I was able to keep the level of the music from my portable player low enough to prevent damage to my hearing, and this is the main purpose of these headphones: reduce ambient noise significantly but play stereo music at a decent quality. And, at the incredible price you can get them for on Amazon - about $27 - they are a musician's dream. I did notice that the high frequencies were a bit rolled off compared to a good set of earbuds, like the NuForce NE-700X, but I think this is on purpose, as loud high frequencies are especially damaging to your hearing, and once the damage is done, it's permanent.

So, if you want to listen to your portable player without distracting noise that is occurring around you, or need a headset to follow a click track in a band, give these a try. They're cheap, and they work.

Tags: Headphones

Comments (5)add comment
noise blocking?
written by Fletcher , August 21, 2011

Does the manufacturer provide spec for sound attenuation?


the specs
written by Fletcher , August 21, 2011

found it: NRR 25 with the added benefit of providing a maximum playback level of 82dBa with 126mv input

Rather surprised you did not provide this info in your "review."



...
written by JJ , August 21, 2011

The amount of noise reduction depends on how well the headphones fit over the sides of your head and seal your ears completely. The shape of your head can affect this, as well as how tight you arrange the spring tension. This is why I did not mention the amount of noise reduction in dB (the manufacturer specification is 25 dB reduction of external noise). Secondly, I could not test the headphones to see if the sound level would go beyond 82 dB.


Comparisons?
written by Richard , August 28, 2011

The real question is whether these provide any better noise reduction than any other over the ear headphones. If they are similar or better and sound is even vaguely reasonable then at $27 they are a bargain for some applications.


...
written by JJ , August 29, 2011

Yes, the noise reduction is very good. I crashed my cymbals very hard, and they sounded about the same level as in the music I was listening to, which I tend to have at medium/low loudness. They reduce external noise much more than standard over the ear headphones.



Write comment
smaller | bigger

Your email is kept private and will not be shown on the website.

 

busy
 
Magazine Web Design, Web Services, and Digital Media Solutions
Array ( [format] => html [option] => com_content [Itemid] => [view] => article [id] => 1369 [layout] => default )